STARTING THE COPIER
When The Main Switch Is In The Stand-by Position
1 Turn on the main switch.
On Stndb y
2 Wait for the copier to warm-up. During the warmdition and the Start key lights green.
up period (about 8 minutes), the Start lights red.
C
3 After warm-up, the copier goes into ready con1 4 7 2 5 8 0 3 6 9
When The Touch Panel Display Is Blank And The Main Switch Is On
The copier is under the stand by condition. Press the Clear Modes/Stand by key to return to the ready condition.
� Regarding the stand by condition, see page 41.
When The Copier Is Set For User Codes
Input your user code (6 digits) using the Number keys. Then touch the [#] key.
� To prevent others from making copies using your user code, press the Clear/Stop and Clear Modes/Stand by key simultaneously after copying. � For details about user codes, see page 132. � If you input the wrong user code, press the Clear/Stop key and input the code again.
